Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

EPROM Prog.

Created by: TheMax at: 11/4/2011 10:12 AM (9 Replies)

Rating (0)

Thanks 0

10 Entries

11/4/2011 10:12 AM	Rate (0)
TheMax Posts: 15 Rating: (0)	Hello, I would like to know, how I do to import the program of my EPROM card (ref. 6ES5 375-0LA15). Thanks a lot.
TheMax Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

11/4/2011 10:25 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/3/2024 Posts: 1525 Rating: (159)	TheMax Hello, I would like to know, how I do to import the program of my EPROM card (ref. 6ES5 375-0LA15). Thanks a lot. Hi TheMax, Have look on the following link. burn S5 EPROM using PG Read the contenents of s5 plc's EPROM
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

11/4/2011 10:46 AM	Rate (0)
TheMax Posts: 15 Rating: (0)	Thanks, I will look this document.
TheMax Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

11/8/2011 10:10 AM	Rate (0)
TheMax Posts: 15 Rating: (0)	When i would like to load my prog. with EPROM prog. , I have "error at the compar.: 00000000 : 70 <> FF" ^^ Thanks.
TheMax Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

11/8/2011 4:47 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/3/2024 Posts: 1525 Rating: (159)	TheMax When i would like to load my prog. with EPROM prog. , I have "error at the compar.: 00000000 : 70 <> FF" ^^ Thanks. Hello TheMax, are you deleted the EPROM through Eraser ? have you checked EPROM is Empty ?
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

11/8/2011 5:00 PM	Rate (0)
TheMax Posts: 15 Rating: (0)	Ammy TheMax When i would like to load my prog. with EPROM prog. , I have "error at the compar.: 00000000 : 70 <> FF" ^^ Thanks. Hello TheMax, are you deleted the EPROM through Eraser ? have you checked EPROM is Empty ? Yes my card is empty. More informations : - I use the mode byte - My card has a memory of 8 KB and my prog. is 1.25 KB
TheMax Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

11/9/2011 10:45 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/3/2024 Posts: 1525 Rating: (159)	Hi TheMax, Have you try to Change the Mode to Word ? or if you have spare EPROM then try with it, I know find out this Eprom are Very painfull...... but still if you can find out any where
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

11/9/2011 10:56 AM	Rate (0)
TheMax Posts: 15 Rating: (0)	Ammy Hi TheMax, Have you try to Change the Mode to Word ? or if you have spare EPROM then try with it, I know find out this Eprom are Very painfull...... but still if you can find out any where I use the 3 mode, and I can't use the other because I have the error "mode de fonctionnement errone". So I use the mode byte. Thanks for your help Ammy.
TheMax Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

3/16/2013 8:56 PM	Rate (0)
Bilal Moolla Posts: 133 Rating: (9)	Hi TheMax I have the exact same problem. I have erased the EPROM using the UV light. When I check to see that the EPROM is empty. It shows me that the EPROM is empty. When I try to burn the EPROM, you can only use BYTE as a configuration mode as the others does not allow you to Burn it gives me the error 00000000 : 70 <> FF. Please let me know if there is a remedy for this. I tryied two EPROMS and the same result.
Bilal Moolla Posts: 133 Rating: (9)
Suggestion To thank Quote Answer

7/10/2017 3:04 PM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by Babak52 is split to a separate thread with the subject Program EPROM With PG M4. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on