Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error at he download to CPU 315

Created by: matiar at: 2/14/2019 6:53 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

2/14/2019 6:53 PM	Rate (0)
matiar Regular Member Joined: 1/9/2016 Last visit: 7/11/2022 Posts: 33 Rating: (0)	Hi I replaced a drive to the mdx61b model with mdv60 and replaced the profibus slot with the dfp21b model with dfp11a sew brand. So in hw config I have to define dfp21b with gsd file sew_6003.gsd. After I created the new profibus slot in hw and wanted to download it to the cpu 315 2dp, an error appeared ( download 13:4344 ) and did not allow me to download. Error massage: " The dp slave with the profibus address 5 of the dp master system 1 has to contain at least one module ". Plz help me Best regards

Suggestion To thank Quote Answer

2/14/2019 7:38 PM	Rate (0)
KFoldesi Silver Member Joined: 9/8/2011 Last visit: 5/26/2023 Posts: 485 Rating: (74)	Sounds like you added the "rack" part of the device. Now open the device in the right tree view and add "cards" to that rack. This will set up how many and what type of inputs and outputs are used for this application. The drive will have to match what you select...
	A smart person learns from their mistakes A wise person learns from others mistakes
Suggestion To thank Quote Answer

2/14/2019 8:17 PM	Rate (0)
matiar Regular Member Joined: 1/9/2016 Last visit: 7/11/2022 Posts: 33 Rating: (0)	please explain more .

Suggestion To thank Quote Answer

2/14/2019 8:53 PM	Rate (0)
KFoldesi Silver Member Joined: 9/8/2011 Last visit: 5/26/2023 Posts: 485 Rating: (74)
	A smart person learns from their mistakes A wise person learns from others mistakes
Suggestion To thank Quote Answer

2/15/2019 9:26 AM	Rate (0)
matiar Regular Member Joined: 1/9/2016 Last visit: 7/11/2022 Posts: 33 Rating: (0)	I can not entry address for dp I'd , when right click on slot ,object peropertis is deactive and I can not entry I adress

Suggestion To thank Quote Answer

2/15/2019 9:43 AM	Rate (0)
matiar Regular Member Joined: 1/9/2016 Last visit: 7/11/2022 Posts: 33 Rating: (0)	This slot is empty and I can not entry input and output adressa

Suggestion To thank Quote Answer

2/18/2019 4:44 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 5/30/2023 Posts: 3716 Rating: (418)	You need to drag-and-drop the correct communication module like was show on the post by KFoldesi.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on