Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ERROR: can not upload station to PG as the data carrier is in read only mode.

Created by: Mr. Sharma at: 8/29/2011 1:00 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/29/2011 1:00 PM	Rate (0)
Mr. Sharma Posts: 6 Rating: (0)	I am unable to upload back-up from S7-300. after making PG/PC settings whenever I click upload station to PG... an error is prompted CAN NOT UPLOAD STATION TO PG AS THE DATA CARRIER IS IN READ ONLY MODE. & no communication takes place. please HELP!!!!
Mr. Sharma Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

8/29/2011 1:11 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Hello, Take alook at What options exist for assigning passwords? You will need a password... Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

8/29/2011 1:31 PM	Rate (0)
Mr. Sharma Posts: 6 Rating: (0)	no such option emerges......i don't have the original back-up of this, the machine is supplied by chinese people hence no hopes of getting password
Mr. Sharma Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

8/29/2011 1:33 PM	Rate (0)
Mr. Sharma Posts: 6 Rating: (0)	is there any trick to break this or bypassing.???
Mr. Sharma Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

8/29/2011 1:42 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	If there was, there would be no use for the passwordprotection No tricks, either you try to get the password or write a new program. Regards, Marcjan
	Last edited by: Marcjan at: 8/29/2011 1:43 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on