Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error communication environment WinCC

Created by: a.aras at: 12/1/2006 9:46 AM (2 Replies)

Rating (0)

Thanks 2

3 Entries

12/1/2006 9:46 AM	Rate (0)
a.aras Advanced Member Joined: 11/29/2006 Last visit: 12/10/2024 Posts: 19 Rating: (2)	Hello, I have a problem installing WinCC 6.0 SP4 on my PC. with XP SP2 It installs until some 7%, when it pauses trying to install "Active Communication Environment", and after some 10 minuttes fails with a "Severe" error installing. My PC has already Step7 installed and running, as well as ProTool and other Siemens software. Thanks in advance Best regards Altuner ARAS Turkey

Suggestion To thank Quote Answer

12/1/2006 10:27 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, have You checked the Following FAQs http://support.automation.siemens.com/WW/view/en/21928032 http://support.automation.siemens.com/WW/view/en/22127699 Also have a look a the WinCC InstallNotes for preconditions Good luck. Get success?
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users altuneraras

12/1/2006 7:21 PM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 12/3/2024 Posts: 549 Rating: (107)	Each Siemenssetup writes a log file on Windows(Winnt) folder. For ACE setup you have to open HMI_SC_ACE.LOG and see what happened (how it ended). You can attache the file in here if you want. Dec

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users altuneraras

|

Share this page:

Share this page on...

Follow us on