Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error Connecting between PLC S7-1200 and Wincc 7.0 Sp3

Created by: Tranhieu0983 at: 5/26/2012 8:54 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

5/26/2012 8:54 AM	Rate (0)
Tranhieu0983 Bronze Member Joined: 9/24/2010 Last visit: 4/21/2024 Posts: 118 Rating: (11)	DearExpert and Pro. I had a problem when try to connectingbetween PLC S7-1200 programming by TIA Portal V11 and Wincc 7.0 Sp3. Please me help andExplain for me why i met that problem. Thank all of you so much :). Hope and Waiting you help. Thank you again. Attachment Erro PC access.jpg (295 Downloads)
	Mechatronic Center Website: www.plcvietnam.com.vn Email : tvhieu.plc@gmail.com
Suggestion To thank Quote Answer

5/26/2012 8:57 AM	Rate (0)
Tranhieu0983 Bronze Member Joined: 9/24/2010 Last visit: 4/21/2024 Posts: 118 Rating: (11)	I send all you about my PC access. I'musing PC access V6 and Win7 64 Bit Ultimate. Thank Attachment Error.zip (235 Downloads)
	Mechatronic Center Website: www.plcvietnam.com.vn Email : tvhieu.plc@gmail.com
Suggestion To thank Quote Answer

5/28/2012 8:49 AM	Rate (0)
Tranhieu0983 Bronze Member Joined: 9/24/2010 Last visit: 4/21/2024 Posts: 118 Rating: (11)	Thank everybody read me letter ^^. I had finished communication between Wincc and S7-1200. Because it haderrors with PC access SP6 and i config it ok now. Thank again
	Mechatronic Center Website: www.plcvietnam.com.vn Email : tvhieu.plc@gmail.com
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Follow us on