Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ERROR CPU 1212c

Created by: VALENO at: 5/14/2013 11:42 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/14/2013 11:42 PM	Rate (0)
VALENO Regular Member Joined: 2/27/2009 Last visit: 1/7/2023 Posts: 6 Rating: (0)	Hello, I have a CPU 1212c dc / dc / dc, is that when you perform a firmware upgrade, the plc was led into error Run / Stop flashing Error LED flashing led flashing Mant unfortunately has no IP address and can not communicate with PG, someone could help me. Thank you.

Suggestion To thank Quote Answer

5/15/2013 9:14 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 3/16/2023 Posts: 8586 Rating: (1125)	Hello Valeno, Perhaps this thread might help: /tf/WW/en/Posts/46536 See point 7. When you have scanned for "accessible devices" you go to "online and diagnostics" -> functions. Here you can assign a new IP address Best regards, Wizard

Suggestion To thank Quote Answer

5/15/2013 2:45 PM	Rate (0)
VALENO Regular Member Joined: 2/27/2009 Last visit: 1/7/2023 Posts: 6 Rating: (0)	Wizard Hi thanks for your answer, Unfortunately it is not possible to communicate the PG with the CPU, and try to do it with tia portal S7-1200 tool, and Primary setup tool, all without success.

Suggestion To thank Quote Answer

5/15/2013 2:53 PM	Rate (0)
VALENO Regular Member Joined: 2/27/2009 Last visit: 1/7/2023 Posts: 6 Rating: (0)	Hello everyone Not if it is correct, but I decided to disassemble the CPU, then went back to assemble, disappeared Error LEDs and maint. I understand that occur disabling the capacitor remanence of the CPU. Now I can update and communicate with the PG. Caution: do not think it advisable to do this when you have the backup of the PLC program. Sorry for my English, I'm using google translator Greetings.

Suggestion To thank Quote Answer

10/30/2017 8:17 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 3/20/2023 Posts: 6662 Rating: (130)	New question published by Vivek kashyap is split to a separate thread with the subject PLC backup of Siemens CPU 1212C with Simatic Manager. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on