Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ERROR IN GUD CONFIG

Created by: SRITN at: 12/1/2013 4:29 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

12/1/2013 4:29 AM	Rate (0)
SRITN Bronze Member Joined: 3/25/2012 Last visit: 12/18/2024 Posts: 99 Rating: (3)	Dera all, Right now i am commissioning 802d sl grinding machine.here i am trying to update my offset value like this $P_UIFR(1,X,TR)=$AA_IM[x]. but i am getting alarm p_uifr not defined like.so i changed the value of 18150 from my default 48 to 32 .after this offset is getting updated but while pressing OFFSET PARAM button it showing note that ERROR IN GUD CONFIGURATION...please help me what i should do to rectify it? Attachment Photo0018_1.jpg (78 Downloads)

Suggestion To thank Quote Answer

12/2/2013 8:03 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	SRITN Dera all, Right now i am commissioning 802d sl grinding machine.here i am trying to update my offset value like this $P_UIFR(1,X,TR)=$AA_IM[x]. but i am getting alarm p_uifr not defined like.so i changed the value of 18150 from my default 48 to 32 .after this offset is getting updated but while pressing OFFSET PARAM button it showing note that ERROR IN GUD CONFIGURATION...please help me what i should do to rectify it? Hello, May be your not loaded the correct tool box? please check the version of the system software and then load the tool box.... Please check. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

12/2/2013 4:32 PM	Rate (0)
SRITN Bronze Member Joined: 3/25/2012 Last visit: 12/18/2024 Posts: 99 Rating: (3)	dear sir, Thanks for your reply.i am using Sinumerik-802Dsl PCU Pro G/N 6FC5370-0AA00-3BA1 and Toolbox 802d sl V01040704.is it compatible one?

Suggestion To thank Quote Answer

12/3/2013 5:54 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	SRITN dear sir, Thanks for your reply.i am using Sinumerik-802Dsl PCU Pro G/N 6FC5370-0AA00-3BA1 and Toolbox 802d sl V01040704.is it compatible one? Hello, You need to have same version of toolbox. Are you loading the correct version of the tool box? Please check. With best regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

12/4/2013 4:27 PM	Rate (0)
SRITN Bronze Member Joined: 3/25/2012 Last visit: 12/18/2024 Posts: 99 Rating: (3)	Dear sir, Thanks for your suggestion.ya after loading sgud.ini updated version the problem has been solved.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on