Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ERROR IN IM 365

Created by: dasrajib at: 7/27/2012 6:53 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/27/2012 6:53 PM	Rate (0)
dasrajib Regular Member Joined: 6/15/2012 Last visit: 9/21/2023 Posts: 17 Rating: (0)	Dear All I am in an emergency situation: CPU - S7 300 is in RUN mode, showing SF error, On diagnostic checking : message found -> For IM 365 Unknown Preset/ actual mismatch or unable to determine Please guide me where is the problem and how to rectify. Rajib Das. Attachment system drawing for modules.pdf (68 Downloads)

Suggestion To thank Quote Answer

7/27/2012 7:45 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 9/26/2023 Posts: 12153 Rating: (2624)	Hello dasrajib; The message from the diagnostic buffer says that the contents of the HWConfig editor and what is actually setup on the CPU racks do not match. Since it points to an error on the IM 365, the error is probably on the remote rack (Rack 1). Could you take a screencapture of the HWConfig , and add a listing of the modules on the racks (part numbers would help). Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on