Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error in s7basic V12 when opening a project and selecting a CPU

Created by: AutoGen_646794 at: 4/1/2014 12:36 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/1/2014 12:36 AM	Rate (0)
AutoGen_646794 Posts: 1 Rating: (0)	FAQ-Expert Dear users of the Siemens Industry Online Support, Welcome to the forum thread on the FAQ „Which license do you need to upgrade from STEP 7 version V5.x, V10.5 or V11 to the TIA Portal V12?“. Here you have the opportunity to scrutinize the solution presented in the FAQ, to amend it and to discuss other solutions. We are looking forward to your feedback and your comments. Enjoy! Your Industry Online Support Team.
AutoGen_646794 Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 4/1/2014 11:06 PM new subject after splitting from /tf/WW/en/Posts/96230#top Last edited by: AutoGen_646794 at: 4/1/2014 12:42 AM hey everuy s7basic''''''''s user i have a big proleme and difficulties to activate s7basic V12 WHENE I OPPEN A PROJECT AND SELEC A CPU FROM CATALOGS LISTE AN ERROR MESSAGE APEARS AND GIVE ME TO CHOOSE BETWEEN CLOSE OR RESTAR THE PRJECT PLEASE IF ANY ONE KNOW THE PROBLEME AND SOLUTIN ANSWER ME
Suggestion To thank Quote Answer

4/2/2014 2:56 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 10/11/2024 Posts: 15292 Rating: (2427)	Support Requestis your bestoption to resolve this kind of problem.
	science guy
Suggestion To thank Quote Answer

4/2/2014 3:12 PM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (172)	Looks like an installation issue. Reinstall the TIA Portal or try repair installation.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on