Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error Message at opening of global script C

Created by: ILYAZ at: 2/11/2008 12:16 PM (8 Replies)

Rating (0)

Thanks 0

9 Entries

2/11/2008 12:16 PM	Rate (0)
ILYAZ Posts: 27 Rating: (1)	Dear experts, When I open Global Scipt C in WinCC ,a message pops that "An unknown Error occurs while accessing \\ENG1\SCRIPTFCT\global.pin". And when i regererate header the programm ends. ENG1 is the name of my engineering station.Please refer to attached screen shoot. Please guide me what i should do.My whole project working has stopped due to this Waiting for your quick help and support ILYAZ Attachment PCS7 V 7.0_CEMAT_Global Script C.JPG (362 Downloads)
ILYAZ Posts: 27 Rating: (1)
Suggestion To thank Quote Answer

2/12/2008 12:38 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Seems to me a CEMAT installation problem.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

3/22/2008 3:38 PM	Rate (0)
PravinK Advanced Member Joined: 2/29/2008 Last visit: 12/11/2024 Posts: 8 Rating: (0)	Hello Ilyaz, Please check computer server name in WinCC Project. if it is different then change it to current computer name then close the WinCC Project (not onle WinCC Explorer, but Explorer and project both). Then again open project and check Global Script C. Please Give me feedback.

Suggestion To thank Quote Answer

7/29/2008 9:41 AM	Rate (0)
autom Posts: 89 Rating: (1)	I Had the same problem. And when i change the server name, with PC name the problem was fixed.
autom Posts: 89 Rating: (1)	Last edited by: autom at: 7/29/2008 9:41 AM
Suggestion To thank Quote Answer

1/19/2022 8:22 AM	Rate (0)
sujitkr Member Joined: 9/12/2019 Last visit: 10/24/2024 Posts: 4 Rating: (0)	My winCC V6.2 , running in windows XP. I am facing the same issue on a another new installed same configuration PC. Already checked and allowed all the check box for "aplib" folder in winCC directory. But till the problem is not solved.please suggest me what to do.

Suggestion To thank Quote Answer

1/19/2022 2:55 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/19/2024 Posts: 14458 Rating: (1806)	sujitkr My winCC V6.2 , running in windows XP. I am facing the same issue on a another new installed same configuration PC. Already checked and allowed all the check box for "aplib" folder in winCC directory. But till the problem is not solved.please suggest me what to do. Hello Create a new project in WinCC explorer, do you get the same error? Did you check the computername in the Server settings in your WinCC project? Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

1/21/2022 11:43 PM	Rate (0)
sujitkr Member Joined: 9/12/2019 Last visit: 10/24/2024 Posts: 4 Rating: (0)	Yes computer name is checked .

Suggestion To thank Quote Answer

1/21/2022 11:50 PM	Rate (0)
sujitkr Member Joined: 9/12/2019 Last visit: 10/24/2024 Posts: 4 Rating: (0)	Mainly I'm facing the issue that my winCC project backup first page is disabled and can't activate (winCC v 6.2 sp2, windows XP). If I run the single page then it's running. All settings inside the project backup are compered and checked with another running same OWS. After all the checkup I am doubting that this global scripts is not running whenever another OWS's scripts are running. So please suggest me what to do? Attachment IMG20220119120150.jpg (297 Downloads)
	Last edited by: sujitkr at: 01/21/2022 23:54:35
Suggestion To thank Quote Answer

1/21/2022 11:57 PM	Rate (0)
sujitkr Member Joined: 9/12/2019 Last visit: 10/24/2024 Posts: 4 Rating: (0)	Dear expert team, I am attaching this page for the reference.please help me to resolve the issue. Attachment IMG20220113202532.jpg (361 Downloads)
	Last edited by: sujitkr at: 01/21/2022 23:58:59
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on