Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error message for graphics at IPC847C

Created by: chewy at: 2/7/2011 9:37 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/7/2011 9:37 AM	Rate (0)
chewy Posts: 6 Rating: (0)	Hi, I am setting up the Industrial Rack PC IPC847C and there is an error message prompt after the graphic driver "Intel Q45 Onboard Graphic Driver" is installed. The driver is installed from the driver installation DVDprovided. The error message is as follows "GfxUI has stopped working". I have attached the snapshotof the error message.The error also does not allow me set my monitor resolution to 1920x1080 for wide screen monitor. I have no errors on the graphics when I was setting up my Industrial Rack PC IPC647C. What could the issue be? Is there a newer version of the Graphic Driver? Thanks. Attachment Graphic Error message.JPG (567 Downloads)
chewy Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

2/7/2011 2:16 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Hello, This error is not concerning video driver. Into Google you will find a lot of confirmations for that. Try the procedure in attachment. (found it in Google). Best regards, Hristo Mihalev Attachment Text Document.zip (534 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on