Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

error message: "Invalid type of ARRAY expression"

Created by: Jazzgeek at: 11/30/2012 12:29 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/30/2012 12:29 AM	Rate (0)
Jazzgeek Advanced Member Joined: 10/16/2012 Last visit: 2/28/2023 Posts: 32 Rating: (2)	Hi, I'm actually using S7-SCL, not portal and cannot seem to get this to work: WORD_TO_BLOCK_DB(TempWord).DW[TempWord2] := 1; Is it possible to "write" to this item? I have only seen examples of this indexing on the right side of the assignment statement. The error I get is: Invalid type of ARRAY expression." Thanks! Jeff
	Last edited by: O_Moderator at: 12/3/2012 8:29 AM new subject after splitting from /tf/WW/en/Posts/67631#top
Suggestion To thank

12/3/2012 8:30 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already published in the following thread SCL Indirect Error Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on