Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error> project cannot be opened

Created by: Milosh at: 8/4/2011 6:07 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/4/2011 6:07 PM	Rate (0)
Milosh Silver Member Joined: 8/16/2010 Last visit: 11/5/2024 Posts: 638 Rating: (12)	Hi all. I have problem when try to open project (created on step7 pro v11) in step7 basic v10.5? Is there any solution? Error is incorrect string as a path, title: project cannot be opened 0025x000000010 Thanks

Suggestion To thank Quote Answer

8/4/2011 8:08 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/9/2025 Posts: 1523 Rating: (230)	STEP 7 v11 projects are not supported in STEP 7 v10.5 and why do you want so?
	Like it? Rate it!
Suggestion To thank Quote Answer

8/5/2011 10:11 AM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 12/18/2024 Posts: 1319 Rating: (176)	That's correct. A V11 project couldn't be opened in 10.5 - vice versa is possible via convert.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

8/5/2011 10:57 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/9/2025 Posts: 1523 Rating: (230)	TomDeWou That's correct. A V11 project couldn't be opened in 10.5 - vice versa is possible via convert. While opening v10.5 project in STEP 7 v11 you will not have any explicit option to convert. While you open the old project it will automatically convert to .ap11 (TIA Portal v11 Project)
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on