Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ET 200M 153-2 REUDANCY MODULE NOT COMMUNICATING WITH S7 300 CPU

Created by: RDD at: 1/23/2013 11:40 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/23/2013 11:40 AM	Rate (0)
RDD Regular Member Joined: 12/9/2012 Last visit: 12/26/2022 Posts: 7 Rating: (0)	Hi I am using s7 300 (software redudancy)CPU and try to communicate with ET200M 153-2 redudancy module. after downloading my hardware configuration i am getting system fault. even i have downladed with one cpu with et200m configuration same system fault i am getting. Profibus connector. i have setted both end ON. bocz i have one IO rack. Pl advise me Attachment s7300cpu.pdf (34 Downloads)

Suggestion To thank Quote Answer

2/11/2013 3:59 PM	Rate (0)
Kampi Posts: 366 Rating: (30)	you're getting a system fault on the CPU? or also on the ET200M? Do you also have a bus fault? Profibus adress on the IM is setted correct? regards, Kampi
Kampi Posts: 366 Rating: (30)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on