Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ET200 parameter assignment error

Created by: Rob_V at: 8/25/2014 11:15 AM (5 Replies)

Rating (1)

Thanks 1

6 Entries

8/25/2014 11:15 AM	Rate (0)
Rob_V Posts: 4 Rating: (1)	Hey, I'm having problems configuring IO modules on a profinet ET200 module. Hardware layout: IM 155-6 PN ST (interface) DI 8x24VDC ST (di8) DI 8x24VDC ST (di8) (server module) I'm getting the following error on the first digital input module: Hardware component not available due to parameter assignment error (ARP / parameter assignment pending) Incoming error: Check the version of the module or check the concurrent use of the module
Rob_V Posts: 4 Rating: (1)
Suggestion To thank Quote Answer

8/25/2014 11:25 AM	Rate (0)
Fafner Silver Member Joined: 3/20/2013 Last visit: 3/9/2023 Posts: 676 Rating: (43)	So please tell your article number of IM and DI. Check your versions in the project. Please tell also which software you are using, STEP 7 Vx? SP? What exaclty are you doing? You already assigned the PNIO name ?
	Best Regards, Fafner
Suggestion To thank Quote Answer

8/25/2014 11:33 AM	Rate (0)
Rob_V Posts: 4 Rating: (1)	I'm using step 7 v13. I already assigned the PNIO name. Catalog numbers: 6ES7 155-6AU00-0BN0 6ES7 131-6BF00-0BA0
Rob_V Posts: 4 Rating: (1)
Suggestion To thank Quote Answer

8/25/2014 1:23 PM	Rate (1)
Rob_V Posts: 4 Rating: (1)	Solved Solution Someone swapped BaseUnits (light /dark).
Rob_V Posts: 4 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Fafner

8/2/2017 11:36 PM	Rate (0)
Riaabr Regular Member Joined: 5/27/2016 Last visit: 8/5/2022 Posts: 1 Rating: (0)	What to do I have just dark type? Somebody support me?

Suggestion To thank Quote Answer

8/3/2017 8:10 AM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1031)	Riaabr What to do I have just dark type? Somebody support me? Support on what? Tell what is your problem exactly. regards,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on