ET200M Distributed IO address setting

Dear,

I have a question how to set address parameters for IO cards installed in ET200M.

Our system has S7-400H redundancy CPU and one ET200M distributed IO as attached "HW config1.PNG" picture file.

And IO card allocation at ET200M is as follows.

Slot 4 : DI32

Slot 5~11 : AI 8

Could you let me know proper IO address numbers for each input cards?

And, there is "Process Image" selections at IO card object properties. Among OB1 PI and PIP choices, which one should we select?

Best regards,

  Dolpoong

In Attached Image only Right click in Mouse you can Find the Address and Status 

Thank you for your attention and comment. Meanwhile, it looks like that my question point was not clear.

I would like to know the proper address number for each inputs.

Please refer attached capture file. Our ET200M system has one DI 32 card and 7 AI cards.

I am not sure the address values marked by red color rectangle is correct.

Please let me proper address values for "I Address" column,

Best regards,

  Dolpoong.