Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ET200SP, HART modules, PROFINET and SIMATIC PDM

Created by: sergiop at: 12/23/2015 8:40 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/23/2015 8:40 PM	Rate (0)
sergiop Regular Member Joined: 3/7/2008 Last visit: 1/10/2020 Posts: 10 Rating: (2)	Dear Experts, I need to configure some SITRANS instruments with HART communication that are connected to HART analog modules in a ET200SP, this ET200SP is an IO Device in a PROFINET network with a S7-1500 CPU as IO Controller. I want to access every instrument from an ES with a stand alone SIMATIC PDM, is that possible? which version of SIMATIC PDM is capable of managing this configuration? what is the hardware I would need to install in my ES to work with SIMATIC PDM in this case? Thanks in advance.

Suggestion To thank Quote Answer

12/23/2015 10:41 PM	Rate (0)
MicroMan Platinum Member Joined: 11/29/2011 Last visit: 10/25/2023 Posts: 1348 Rating: (228)	Hi, This FAQ should help you: How do you incorporate HART field devices with SIMATIC PDM in the TIA Portal? I hope I could help!
	- What you read here, please check with manuals and your requirements. - Do not forget to Test, Test and Test... - If the post is helpful, please RATE it! MicroMan
Suggestion To thank Quote Answer

12/28/2015 3:03 PM	Rate (0)
sergiop Regular Member Joined: 3/7/2008 Last visit: 1/10/2020 Posts: 10 Rating: (2)	Thanks MicroMan!! Your FAQ was very useful!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on