Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

EventList

Created by: khicontiti at: 6/12/2006 5:56 AM (20 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

21 Entries

Entries per page: 10 | 20 | all

6/12/2006 5:56 AM	Rate (0)
khicontiti Posts: 32 Rating: (0)	Hi, everybody Pls help to solveproblem regarding Event list. I don't know why Event list in RT, there aremuch infomation of a event. I have checked AlarmLogging cofiguration. I guess it's time cyclic, isn't it? Yours, SmallMonkey Attachment Eventlist.JPG (469 Downloads)
khicontiti Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

6/12/2006 10:34 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Apologies but I am unclear what you are asking. Are you saying that you have not configured these events and don't know where they are coming from ?

Suggestion To thank Quote Answer

6/12/2006 10:45 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, in PCS7 you could use the DIGMON-block in your S7- CPU for suppressing this flickering of your input-signal. If you are WinCC(native) user you should try to filter this flickering on you S7-CPU before handing over the value to WinCC nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/12/2006 12:27 PM	Rate (0)
khicontiti Posts: 32 Rating: (0)	Sorry for my unclear questions. Our project is kind of SICAM SAS. it consists of M7-CPU, server PC & Client PC. With server project, after creating the chanel: S7-Protoctol Suite... I use the Global Wizard to creat tags from the file of M7 (subtation controler - SC).- Global Wizard will only appear in WinCC Explorer if you installed SICAM WinCC V4.03. - In Alarmlogging, message classes were created automaticly. I don't need to creat manualy. - In Graphics Desiger, I created a picture which included WinCCAlarm Control... (drag & drop via Control pallete). But the result looks like the attached picture - > Events always repeat 6 times. So I don't know why. Thanks, SmallMonkey
khicontiti Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

6/12/2006 1:55 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Have you already checked whether/why this signal is coming from your M7??? WinCC is just displaying the arriving messages....
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/13/2006 4:19 AM	Rate (0)
khicontiti Posts: 32 Rating: (0)	I don't know how to check coming messages from M7-CPU. Could you show me to do that? I only can check the conection betweenPC & M7-CPU, and it works ok. Thanks SmallMonkey
khicontiti Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

6/13/2006 8:46 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, I must admit, that I am too young for M7. [:D] Which block/module in your M7 is generating these messages??? => try to switch the module e.g. off nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/15/2006 12:22 PM	Rate (0)
khicontiti Posts: 32 Rating: (0)	Anybody has any suggest for me.
khicontiti Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

6/15/2006 3:47 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Check the alarm logging config file if the alarm are also listed 6 times. What you also could do is to include the messagenumber number column into the alarm control. In this way you can check in runtime if it is the same alarm that is triggerd 6 times, or 6 different alarms with the same description. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

6/19/2006 6:21 AM	Rate (0)
khicontiti Posts: 32 Rating: (0)	I have checked Alarm Logging configuration file, each tag has unique number. Next Thursday, I am going to the site. Upto now, I haven't any idea yet. Anybody have any opinion, pls send to me. Thanks everyone, SmallMonkey
khicontiti Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Communication (OPC, S7, OtherSystem)

Follow us on