Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Ex barrier for LOGO digital inputs

Created by: sth at: 12/16/2009 1:18 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/16/2009 1:18 PM	Rate (0)
sth Posts: 29 Rating: (1)	Hi, I will have to connect a LOGO to different sensors which are in an explosive area. The sensors are Ex-approved, the LOGO will be in another room. I'm looking for an Ex barrier in order to connect the sensors (NO contact, 1 contact per sensor, from 2 to 8 sensors, depending of the applications) to the LOGO. I already did a research on google and Siemens website but I would know if some of you have used an Ex-barrier, which model and what is your opinion about it (quality, how many insulated input/output, type of insulation: relays or opto-couplers,..)
sth Posts: 29 Rating: (1)
Suggestion To thank Quote Answer

12/16/2009 6:59 PM	Rate (0)
cdrshort Bronze Member Joined: 9/6/2008 Last visit: 3/29/2024 Posts: 134 Rating: (16)	try to look at phoenix contact http://eshop.phoenixcontact.com/phoenix/treeViewClick.do?UID=577110035&parentUID=204125&reloadFrame=true if the link dont open make a search for "ex" at the primary site of phoenix
	http://electrotech-techblogg.blogspot.gr/
Suggestion To thank Quote Answer

12/19/2009 2:06 AM	Rate (0)
FogBot Posts: 15 Rating: (0)	I use the Phoenix2835493intrinsic safety barriers, discrete 2 CH24VDC. Never had any problems. I wish Siemens made them.
FogBot Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on