Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Example of PCS7-SCL-program about IEC-101, 104

Created by: AlexRezn at: 3/6/2009 7:31 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/6/2009 7:31 AM	Rate (0)
AlexRezn Posts: 2 Rating: (0)	I have a stend with next configuration: PS307 CPU315-2 CP340 SIPLUS RIC MAIN RIC AI8 I have IEConS7_manual.pdfaboutlibrary for communications with 101, 104 protokols. I can not learn to work with SIPLUS RIC after reading this document. Hence I can notpurchase this units and use its in projects. Where can I finda fewlittle concrete examples, how toprogramwork withprotocols 101, 104 and RIC-unitson SCL with identificators in English and descriptions and comments in English or Russian?
AlexRezn Posts: 2 Rating: (0)	Last edited by: AlexRezn at: 3/6/2009 8:05 AM
Suggestion To thank Quote Answer

3/10/2009 9:58 AM	Rate (0)
AlexRezn Posts: 2 Rating: (0)	Why there is not answer?
AlexRezn Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/14/2009 2:43 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 1/4/2025 Posts: 703 Rating: (96)	Hello, maybe because nobody who read this doesn't have any example to provide here... Regards Sydney

Suggestion To thank Quote Answer

6/20/2009 1:32 PM	Rate (0)
S-Seven Posts: 13 Rating: (1)	Hello, may you contact: "GSucher" (forum-member) ....... or one of the named persons of this link: https://www.automation.siemens.com/siplus/html_76/support/service.htm Regards
S-Seven Posts: 13 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on