Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

execution time of program

Created by: chenhaotj at: 9/10/2008 10:44 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/10/2008 10:44 AM	Rate (0)
chenhaotj Posts: 26 Rating: (0)	Dear everybody, How can i get execution time of user program in Cycle interruption block like OB35? thanks in advance
chenhaotj Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

9/10/2008 11:17 AM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 6/1/2023 Posts: 12030 Rating: (2594)	Hello chenhaotj; Do you mean you need to read the value of the OB1 scantime? In that case, you can read one of the temp variables of OB1 named "OB1_Previous_Cycle"; move it to an internal variable of your choice that you can use later in your program. It gives you the scantime in ms. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

9/10/2008 1:23 PM	Rate (0)
Ssc_Mikro Posts: 196 Rating: (12)	Hi Chehaotj You can call SFC64 in the top and in the last NW then the sub the values and you have the xecution time in ms for OB35
Ssc_Mikro Posts: 196 Rating: (12)
Suggestion To thank Quote Answer

9/10/2008 3:57 PM	Rate (0)
DeepakD Bronze Member Joined: 11/30/2006 Last visit: 3/16/2021 Posts: 118 Rating: (11)	dchartier Hello chenhaotj; Do you mean you need to read the value of the OB1 scantime? In that case, you can read one of the temp variables of OB1 named "OB1_Previous_Cycle"; move it to an internal variable of your choice that you can use later in your program. It gives you the scantime in ms. Hope this helps, Daniel Chartier Hi Chenhaot check this for more details /tf/WW/en/Posts/21277#top

Suggestion To thank Quote Answer

9/11/2008 7:12 AM	Rate (0)
chenhaotj Posts: 26 Rating: (0)	Thanks eveybody
chenhaotj Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on