Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Extracting data from SINUMERIK 840D sl

Created by: Tharekm at: 5/15/2012 5:43 PM (8 Replies)

Rating (0)

Thanks 0

9 Entries

5/15/2012 5:43 PM	Rate (0)
Tharekm Posts: 4 Rating: (0)	Hello, I would like to extract a numerical file with the set and actual position of one of the axis of a 5-axis CNC with SINUMERIK 840D sl. I know how to plot some values on the screen but i do not know how to extract them. Thanks in advance
Tharekm Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

5/15/2012 8:06 PM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi What do you mean by "extract them"? Give us more details. Good luck Nit

Suggestion To thank Quote Answer

5/15/2012 8:43 PM	Rate (0)
Tharekm Posts: 4 Rating: (0)	I'm making a matlab model to study the mechanical vibrations of the machine. So, i need to validate my model with the actual behavior of the CNC module. I am able to see the position vs. time plot in the screen of the siemens controller but i don't know how to generate a file (e.g .txt file) in order to compare my simulation results against the real ones. Thanks! Tharek M
Tharekm Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

5/15/2012 9:34 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 11/14/2024 Posts: 593 Rating: (64)	Hi. I think it can only be done effectively by placing two measuring indicator. If you move the other axis, the value of the displacement of these axes will not change. Best regards.

Suggestion To thank Quote Answer

5/15/2012 10:08 PM	Rate (0)
Tharekm Posts: 4 Rating: (0)	I want to move first one axis, then two and finally three (I'm an working with a Cartesian structure) so the problem is not the number of axes. I know how to open the scopes and see all the data from the linear encoders and the set create by the path motion calculation but i want to re-plot the data with another software. That's why i need to extract it in a binary file, txt file or another format. Thanks for the help!
Tharekm Posts: 4 Rating: (0)	Last edited by: Tharekm at: 5/15/2012 10:11 PM
Suggestion To thank Quote Answer

5/15/2012 10:12 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 11/14/2024 Posts: 593 Rating: (64)	Tharekm I want to move first one axis, then two and finally three (I'm an working with a Cartesian structure) so the problem is not the number of axes. I know how to open the scopes and see all the data from the linear encoders and the set create by the path motion calculation but i want to re-plot the data with another software. That's why i need to extract it in a binary file, txt file or another format. Hi. Maybe you need a program to renishaw? Best regards.

Suggestion To thank Quote Answer

5/15/2012 11:29 PM	Rate (0)
Tharekm Posts: 4 Rating: (0)	I don't know the meaning of renishaw. Would you please explain what you mean? Thank you!
Tharekm Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

5/17/2012 9:34 AM	Rate (0)
MBA Gold Member Joined: 3/19/2006 Last visit: 4/29/2024 Posts: 594 Rating: (78)	Tharekm I know how to open the scopes and see all the data from the linear encoders and the set create by the path motion calculation but i want to re-plot the data with another software. T Thanks for the help! if you talking from the internal scope of the 840D you can use this programm to read the trace files Attachment NcDiagW95.zip (459 Downloads)

Suggestion To thank Quote Answer

4/10/2013 11:41 AM	Rate (0)
Mijo_ Posts: 2 Rating: (0)	Hello, I'm having some simalur problems in extracting data from a Siemens 840D, I would like to extract the n blocknumber with it's exact time, this way I wnt to couple this data to the actual vibration measurement, which is measured externally... I downloaded the zip file, but don't know how to scope the 840d.
Mijo_ Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on