Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

F-Library In FBD Editor

Created by: fazal hussain at: 6/2/2006 1:11 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/2/2006 1:11 PM	Rate (0)
fazal hussain Posts: 42 Rating: (0)	Hi, I cannot see the F-Library in the FBD editor, when i try to create a F type FB even though i have installed this library and is accessable via the CFC editor
fazal hussain Posts: 42 Rating: (0)
Suggestion To thank Quote Answer

6/4/2006 5:20 PM	Rate (0)
Late Platinum Member Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, Which software have you installed? You need if you want to use the System Safetywith the newest software the next packages: - STEP7 V5.4 - CFC V6.1 + SP1 - S7-SCL V5.3 + SP1 + HF1 - S7 F Library V1.2 + SP4 - S7 F ConfigurationPack V5.5 - S7 F Systems V5.2 + SP4 This blocks are only visible/usable in CFC [:o] I presume you have the CFC library... When you want to use the Distributed Safety, then you need the next packages: - STEP7 V5.4 - S7 Distributed Safety Programming V5.4 + SP1 - S7 F ConfigurationPack V5.5 This blocks are only visible/usable in F-LAD/F-FBD [:o]
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on