Navigation

F30027

Created by: aliar2 at: 7/6/2019 8:20 PM (1 Replies)

7/6/2019 8:20 PM	Rate (0)
aliar2 Posts: 11 Rating: (0)	PISCEAN 2010 Hello, Fault 30027 = Power unit Precharging DC link time monitoring is exceeded. Please check the input AC voltage, 3 phase balance value, line contcator & its correct operation. Please check the fault value in r0949 (interpret it in binary from Hex) & report it here. Dear PISCEAN, I have the same problem (F30027) with r949 fault value bit 8 (655098). whats the problem, Power supply is OK (415VAC, 50Hz) DC link voltage 2.2V Best Regards ------------------------------------------------------------------------------------------ Split from 30027 fault. Attachment new ERROR2.jpg (173 Downloads)
aliar2 Posts: 11 Rating: (0)	Last edited by: aliar2 at: 07/06/2019 20:21:16 Last edited by: aliar2 at: 07/06/2019 20:41:12 Last edited by: Jen_Moderator at: 07/08/2019 07:33:05 New subject after splitting
Suggestion To thank

7/8/2019 7:36 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (173)	Closed cause question posted twice. The second thread with the subject F30027 with r949 fault value bit 8 (655098) is published within the conference SINAMICS. Best regards Jen_Moderator

Suggestion To thank