Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

faceplate instance missing properties

Created by: Borghy at: 11/29/2006 8:07 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/29/2006 8:07 AM	Rate (0)
Borghy Regular Member Joined: 9/5/2006 Last visit: 11/21/2024 Posts: 7 Rating: (0)	Hi everybody, [:cry:]Icreated some faceplates with WinCC flexible 2005 SP1, in the faceplate editor all the properties and the events are configured in the right way, but when I try to drag&drop my new faceplate in a screen to create one instance all the properties are missing!!!!! Why? Bye

Suggestion To thank Quote Answer

11/29/2006 9:13 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, did you proceed acc. to this FAQ?? http://support.automation.siemens.com/WW/view/en/21659040 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

11/29/2006 9:54 AM	Rate (0)
Borghy Regular Member Joined: 9/5/2006 Last visit: 11/21/2024 Posts: 7 Rating: (0)	Of course... Maybe I found the problem. In my faceplate there is a text field, I need to change the text color dynamically according to some process values; so in the configured properties of the faceplate there is one text_foreground_color linked to the foreground property of the text field. If this property is "static" I can see the properties list in the instances of my faceplate, BUT when I change this property to "dynamic" (red symbol on the left) the property data type change from "color" to "double" and the instances of my faceplate loose all the properties.

Suggestion To thank Quote Answer

5/6/2008 5:34 PM	Rate (0)
budtse Posts: 13 Rating: (0)	Did you ever resolve this problem ? I am facing the same: In WinCC Flexible 2007I created a faceplate. I can see the static properties in the instance, but the Dynamic Interface shows no properties at all. regards, budtse
budtse Posts: 13 Rating: (0)	Last edited by: budtse at: 5/6/2008 5:35 PM
Suggestion To thank Quote Answer

5/6/2008 5:41 PM	Rate (0)
budtse Posts: 13 Rating: (0)	Ok I found it. The dynamic property was created under "Tags" in stead of under "MyProperties". Apparently properties that are created under "Tags" are only available inside the faceplate.
budtse Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on