Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Fail when i inicialize my new WinCC

Created by: Txaby at: 12/13/2006 5:23 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/13/2006 5:23 PM	Rate (0)
Txaby Advanced Member Joined: 1/11/2006 Last visit: 11/17/2021 Posts: 58 Rating: (2)	Hi people. I have updated the WinCC 6.0 to the SP4, and i have installed the Connectivity Pack 6.1 SP1 and the WebNavigator 6.1 SP1. When I try to open a project which was created with WinCC 6.0 SP3 or create a new project; an fail box appears saying me that there is a fail when the server starts, and check the DCOM settings. What is the reason for this behaviour? and What is the solution?. Thank you for your help. Best Regards Javi

Suggestion To thank Quote Answer

12/14/2006 10:51 AM	Rate (0)
ateam Bronze Member Joined: 12/8/2006 Last visit: 11/27/2023 Posts: 170 Rating: (26)	hallo, did you check the dcom-setting of your operating sytsem? http://support.automation.siemens.com/WW/view/en/16503255 best regards ateam

Suggestion To thank Quote Answer

12/14/2006 11:50 AM	Rate (0)
DimiCamp Posts: 168 Rating: (49)	and compatibility too... http://support.automation.siemens.com/WW/view/en/21928032 If something doesn't match I recomend that you format your computer and start everything from zero (or restore a HD image if you have one)... Best regards, Dimitri
DimiCamp Posts: 168 Rating: (49)	Last edited by: DimiCamp at: 12/14/2006 11:54 AM
Suggestion To thank Quote Answer

12/14/2006 12:16 PM	Rate (0)
Txaby Advanced Member Joined: 1/11/2006 Last visit: 11/17/2021 Posts: 58 Rating: (2)	Thanks to both, the problem was solucionated with your links. Best Regards Javi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on