Navigation

Failed project conversion V15 to V15.1

Created by: maccari79 at: 7/23/2019 1:23 PM (19 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

20 Entries

Entries per page: 10 | all

7/23/2019 1:23 PM

Rate (0)

maccari79

Advanced Member

Joined: 8/18/2011

Last visit: 11/14/2023

Posts: 14

Rating:

(0)

I am trying to convert my project from V15 to V15.1, but it is failing and the log has the following information:

4.1

Type	Message	Time
	Upgrade started	7/23/2019 8:08:36 AM
	CheckRepair lost+found objects	7/23/2019 8:08:44 AM
	CheckRepair missing bidirectional links	7/23/2019 8:08:50 AM
	Starting conversion of UMAC data.	7/23/2019 8:09:13 AM
	Conversion of UMAC data is finished.	7/23/2019 8:09:13 AM
	Starting conversion of user and roles configuration data.	7/23/2019 8:09:13 AM
	User with the required engineering right "Manage users and roles" has logged in.	7/23/2019 8:09:32 AM
	Conversion of user and roles configuration is finished.	7/23/2019 8:09:32 AM
X	Error occurred while converting the type 'CodeBlockData' (model type 'Siemens.Simatic.Lang.Model.Blocks.CodeBlockData')	7/23/2019 8:09:49 AM
X	Unconverted object type found: 'Object' (Model type 'Siemens.Simatic.AlarmServices.Model.LangConnector.AlarmServicesDataContainer')	7/23/2019 8:09:49 AM
X	Unconverted object type found: 'Object' (Model type 'Siemens.Simatic.Hmi.Utah.Common.Base.HmiConvertData')	7/23/2019 8:09:49 AM
	Unconverted object type found: 'CodeBlockData' (Model type 'Siemens.Simatic.Lang.Model.Blocks.CodeBlockData')	7/23/2019 8:09:49 AM
	The project or library possibly contains data that cannot be upgraded by the currently installed software. Repeat the upgrade with a newer version of your software that includes more functionality.	7/23/2019 8:09:49 AM
	Upgrade failed. For more information, see the log file. If the project still cannot be upgraded. please contact Siemens Customer Support.	7/23/2019 8:09:49 AM
	The cross-reference information is being converted.	7/23/2019 8:09:50 AM
	The cross-reference information was created successfully.	7/23/2019 8:09:55 AM
	Conversion of the cross-reference information is finished.	7/23/2019 8:09:55 AM
	Upgrade failed. For more information, see the log file. If the project still cannot be upgraded. please contact Siemens Customer Support.	7/23/2019 8:09:55 AM
	Project 'E:\Documentos\Projetos S7-1200\4.1\System\PEData.plf' could not be upgraded.	7/23/2019 8:09:56 AM

Can anybody help me?

7/23/2019 1:45 PM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1054)	hi maccari79, Did you compile the V15-project? any errors or messages while compiling? regards,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

7/23/2019 2:04 PM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 11/13/2024 Posts: 4027 Rating: (602)	Hi maccari79, if V15.0 project will be compiled (Hardware and Software complete) without errors, do a Service Request at Siemens and Send ZAP15 File to check it. Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

7/23/2019 2:06 PM	Rate (0)
maccari79 Advanced Member Joined: 8/18/2011 Last visit: 11/14/2023 Posts: 14 Rating: (0)	No errors, only warnings...

Suggestion To thank Quote Answer

7/23/2019 8:56 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/13/2024 Posts: 15397 Rating: (2443)	Add English or German to your supported languages in V15. Compile HMI and try again. maccari79 No errors, only warnings...
	science guy
Suggestion To thank Quote Answer

7/24/2019 12:52 PM	Rate (0)
maccari79 Advanced Member Joined: 8/18/2011 Last visit: 11/14/2023 Posts: 14 Rating: (0)	huggy_d1 Add English or German to your supported languages in V15. Compile HMI and try again. maccari79 No errors, only warnings... I already had the project in English, I ended up adding German, but I still have the same problem. Thanks for the try Attachment lang.jpg (468 Downloads)
	Last edited by: maccari79 at: 07/24/2019 13:23:31
Suggestion To thank Quote Answer

7/24/2019 8:31 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/13/2024 Posts: 15397 Rating: (2443)	Does that also apply to your HMI? If it does, try splitting the HMI into a separate project and just converting the HMI by itself, then do the same with the PLC (and everything else except the HMI). Once they are converted, combine them back together. maccari79 huggy_d1 Add English or German to your supported languages in V15. Compile HMI and try again. maccari79 No errors, only warnings... I already had the project in English, I ended up adding German, but I still have the same problem. Thanks for the try
	science guy
Suggestion To thank Quote Answer

7/24/2019 8:38 PM	Rate (0)
maccari79 Advanced Member Joined: 8/18/2011 Last visit: 11/14/2023 Posts: 14 Rating: (0)	The problem is that in this project I have 8 PLCs and 5 HMIs and everyone has communication with each other . But I will try to do what you advised me. thank you huggy_d1 Does that also apply to your HMI? If it does, try splitting the HMI into a separate project and just converting the HMI by itself, then do the same with the PLC (and everything else except the HMI). Once they are converted, combine them back together. maccari79 huggy_d1 Add English or German to your supported languages in V15. Compile HMI and try again. maccari79 No errors, only warnings... I already had the project in English, I ended up adding German, but I still have the same problem. Thanks for the try

Suggestion To thank Quote Answer

7/24/2019 8:45 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/13/2024 Posts: 15397 Rating: (2443)	Ok, one project with 5 HMIs. One project with 8 PLCs. Make the HMI project compile completely, and the same for the PLC project. You may have to move some logic to another block temporarily and not call it (leave a placeholder for it) to get the PLC project to compile. For the HMI project, you can create 8 new PLCs and copy the DBs / tag tables as needed to get them to compile. Don't copy the PLCs to the HMI project. That puts you back where you started. maccari79 The problem is that in this project I have 8 PLCs and 5 HMIs and everyone has communication with each other . But I will try to do what you advised me. thank you huggy_d1 Does that also apply to your HMI? If it does, try splitting the HMI into a separate project and just converting the HMI by itself, then do the same with the PLC (and everything else except the HMI). Once they are converted, combine them back together. maccari79 huggy_d1 Add English or German to your supported languages in V15. Compile HMI and try again. maccari79 No errors, only warnings... I already had the project in English, I ended up adding German, but I still have the same problem. Thanks for the try
	science guy
Suggestion To thank Quote Answer

7/25/2019 2:53 PM	Rate (0)
maccari79 Advanced Member Joined: 8/18/2011 Last visit: 11/14/2023 Posts: 14 Rating: (0)	I didn't get it, I took all the HMIs, but the problem persists ... huggy_d1 Ok, one project with 5 HMIs. One project with 8 PLCs. Make the HMI project compile completely, and the same for the PLC project. You may have to move some logic to another block temporarily and not call it (leave a placeholder for it) to get the PLC project to compile. For the HMI project, you can create 8 new PLCs and copy the DBs / tag tables as needed to get them to compile. Don't copy the PLCs to the HMI project. That puts you back where you started. maccari79 The problem is that in this project I have 8 PLCs and 5 HMIs and everyone has communication with each other . But I will try to do what you advised me. thank you huggy_d1 Does that also apply to your HMI? If it does, try splitting the HMI into a separate project and just converting the HMI by itself, then do the same with the PLC (and everything else except the HMI). Once they are converted, combine them back together. maccari79 huggy_d1 Add English or German to your supported languages in V15. Compile HMI and try again. maccari79 No errors, only warnings... I already had the project in English, I ended up adding German, but I still have the same problem. Thanks for the try

Suggestion To thank Quote Answer

Share this page:

Share this page on...

Created by: maccari79 at: 7/23/2019 1:23 PM (19 Replies)

Rating (0) Thanks 0

20 Entries

Entries per page: 10 | all

Attachment

Last edited by: maccari79 at: 07/24/2019 13:23:31

20 Entries

Entries per page: 10 | all

All about STEP 7 (TIA Portal)

Follow us on

Rating (0)

Thanks 0