Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

failed to open start screen

Created by: Kapadia at: 5/6/2009 8:39 AM (10 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

5/6/2009 8:39 AM	Rate (0)
Kapadia Posts: 15 Rating: (0)	Dear all, I have WinCC flexible 2008 SP1 is installed in my PC. When I am trying to open one perticular project, it shows following error: "Error : Failed to open screen Start Screen. See log file for more information." and when I double click on the start screen it repeats the same error message! Can somebody help me on this issue? Regards, Saurabh.
Kapadia Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/6/2009 10:15 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hi, It would be very helpful if you post log file here. It might be damaged project itself or damaged installation of WinCC Flexible. Do you have same error with other projects ?
	Best regards, Darius
Suggestion To thank Quote Answer

5/6/2009 10:44 AM	Rate (0)
Kapadia Posts: 15 Rating: (0)	Thanks for your reply. I have attached log file here. My other projects are opening properly without any error. Attachment SABAR_BUTTER_log.zip (62 Downloads)
Kapadia Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/6/2009 11:07 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 10/10/2024 Posts: 8745 Rating: (1168)	Dear Kapadia, I guess you already tried the following: Go to Options -> delete temporary files Then compile project again. Best regards, Wizard

Suggestion To thank Quote Answer

5/7/2009 8:40 AM	Rate (0)
Kapadia Posts: 15 Rating: (0)	Dear Wizard, Your guess is right.. I have already tried that option. And problem is still the same.. Regards.
Kapadia Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/7/2009 6:53 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	I'm affraid that your project could be damaged. You could try open it with other versions with WinCC Flexible, but I think this would not help.
	Best regards, Darius
Suggestion To thank Quote Answer

5/8/2009 6:22 AM	Rate (0)
Kapadia Posts: 15 Rating: (0)	Yes I think you are right... Is that any way to fix it up??
Kapadia Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/8/2009 9:24 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 10/10/2024 Posts: 8745 Rating: (1168)	Dear Kapadia, Contact your Siemens representative. It might be possible to repair your project. Best regards, Wizard

Suggestion To thank Quote Answer

5/8/2009 1:20 PM	Rate (0)
Kapadia Posts: 15 Rating: (0)
Kapadia Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/8/2009 6:32 PM	Rate (0)
S7User_2009 Posts: 2 Rating: (0)	Saurabh, If this project is of an older flex verison I suggest you try and find errors inthat screen before you import in flex 2008. I have expereinced that wincc flex 2008 has started showing up lots of errors which were initially ignored by 2005. This could be the reason why one of your screens may have issues.
S7User_2009 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on