Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Fast log system

Created by: DriesC at: 3/1/2019 12:34 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/1/2019 12:34 PM	Rate (0)
DriesC Posts: 2 Rating: (0)	Hi, I am working on a project that will test the impact resistance of plastic packaging. The test stand will have to measure the maximum impact force. I am searching for a system to receive and log the parameters that the loadcell (the impact sensor I use) sends. This system needs to be Fast enough. Because a faster read means a more precise measurement. Ex. The peak of the impact force can be just 0.5ms long. And if the controller/log system only reads every 2ms, then it will be an inaccurate read. Do you recommend a specific log system for my application? Kind regards, Dries
DriesC Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/1/2019 1:07 PM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 9/10/2024 Posts: 4689 Rating: (720)	How about a load cell transducer and a oscilloscope?
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

3/1/2019 1:54 PM	Rate (0)
mopS04 Platinum Member Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1054)	hi DriesC, I have seen somthing simular on a traid fair. Have a look here: iba I guess they have a solution for you. regards,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on