Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Fault Error F01060 in S120 SINAMIC

Created by: @Ani at: 6/25/2019 8:37 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/25/2019 8:37 AM	Rate (0)
@Ani Posts: 1 Rating: (0)	Hi This is Anish Am facing the Fault Error F01060 in S120 SINAMIC. Kindly help me to solve the Issue ------------------------------------------------------------------------------------------ Split from Issue in the Sinamics S120/CU320 - Fault codes 7565, 31431 and 31115.
@Ani Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 07/10/2019 13:16:50 New subject after splitting
Suggestion To thank Quote Answer

6/25/2019 8:45 AM	Rate (0)
Soni. Posts: 153 Rating: (7)	Hello Anish, Check for your S120 Control unit Power supply(24V) first, it is observed by me before 2-3 time if power supply have spikes it can given F1060 CU: Internal error (parameter group not available) sometimes @Ani Hi This is Anish Am facing the Fault Error F01060 in S120 SINAMIC. Kindly help me to solve the Issue
Soni. Posts: 153 Rating: (7)	Last edited by: Soni. at: 06/25/2019 08:45:57
Suggestion To thank Quote Answer

6/25/2019 8:51 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (877)	@Ani Hi This is Anish Am facing the Fault Error F01060 in S120 SINAMIC. Kindly help me to solve the Issue F01060 = CU: Internal error (parameter group not available). Suggest you to contact your nearest Siemens technical support center.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on