7/25/2017 9:18 AM | |
Posts: 22 Rating: (0) |
When I set up the installation between Starter and s120, Starter does not recognize CU310-2DP. I can not interfere in the parameters so very stuck. |
7/25/2017 9:26 AM | |
Posts: 22 Rating: (0) |
I use an ethernet network connection using an RJ45 cable to connect. The starter can not recognize CU |
7/25/2017 9:48 AM | |
Posts: 22 Rating: (0) |
--deleted teamview data- |
Last edited by: Jen_Moderator at: 7/27/2017 7:20:32 AMDeleted teamview data. Disagree with Forum Terms. |
|
7/25/2017 10:00 AM | |
Joined: 5/12/2006 Last visit: 4/25/2024 Posts: 22228 Rating: (2980)
|
nope |
7/25/2017 10:06 AM | |
Posts: 22 Rating: (0) |
Thanks expert used to support . I think it very difficul with me when i can't connecter BOP and Starter with sinamic s120. |
7/25/2017 10:39 AM | |
Joined: 10/11/2006 Last visit: 4/24/2024 Posts: 5823 Rating: (789)
|
Hello, If you cannot or want not provide the information request from forum members, you should contact the customer support: http://www.siemens.com/automation/support-request Don't mix the forum experts up with the customer support! |
With best regards, |
|
This contribution was helpful to1 thankful Users |
7/26/2017 11:36 AM | |
Joined: 5/12/2006 Last visit: 4/25/2024 Posts: 22228 Rating: (2980)
|
Hello, attach the messages! Also check if any fault active after the download, attach a screenof it |
7/27/2017 10:23 AM | |
Posts: 22 Rating: (0) |
when i download from starter to CU310-2DP : |
7/27/2017 10:24 AM | |
Posts: 22 Rating: (0) |
and sinmic Fault F7080 |
7/27/2017 10:43 AM | |
Posts: 22 Rating: (0) |
all fault |
7/27/2017 10:58 AM | |
Posts: 22 Rating: (0) |
yes i fix p346=2 and sinamic Fault F07080 anh alarm: |
7/27/2017 11:09 AM | |
Joined: 5/12/2006 Last visit: 4/25/2024 Posts: 22228 Rating: (2980)
|
which value have the alarm 7080 ? This value represent a wron parameter , you should check this parameter |
7/27/2017 1:34 PM | |
Posts: 22 Rating: (0) |
Thank all expert! i can do it |
Follow us on