FAULT F30027

Dear Sir,
I have the same problem (F30027) with r949 fault value bit 8 (655098).
whats the problem?
DC link voltage 2.2V
Power supply is OK (415VAC, 50Hz)
Best Regards

dchartier

Hello Bruno;

This is how fault message F30027 is described in the G130/G150 List manual:

https://support.industry.siemens.com/cs/ww/en/view/109754866

Hope this helps,

Daniel Chartier

------------------------------------------------------------------------------------------
Split from FAULT F30027 URGENT !!.

Closed cause question posted twice.

The second thread with the subject F30027 with r949 fault value bit 8 (655098) is published within the conference SINAMICS.

Best regards

Jen_Moderator