Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Fault with Alarm List

Created by: Hero_ac at: 3/13/2009 11:43 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/13/2009 11:43 AM	Rate (0)
Hero_ac Bronze Member Joined: 6/20/2008 Last visit: 2/19/2024 Posts: 73 Rating: (1)	Hi everyone, I have one problem and i want all of you can help me to solve this: - I have 2 WinCC Server Project and 2 WinCC Client Project, my automation system is for a 110kV substation system. - All of my devices statusare updated suscessfully in the screen - When i click a button to call alarm list but unfortunately the system is suspended(both WinCC Client and WinCC Server). I use WinCC V6.2SP2, SicamPass CC V6.0 I am looking forward to hearing from you! Thanks and Best regards

Suggestion To thank Quote Answer

3/13/2009 8:21 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi Hero_ac, There have been many conflict problems between WinCC and Sicam Pass. See the following thread for example: WinCC crashes while closing project You may have to install a HF for this problem. I suggest you contact the Siemens Tech Support, they might give you the hotfix. Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Communication (OPC, S7, OtherSystem)

Follow us on