Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FB 144 problems with language version

Created by: Kovsh at: 8/29/2011 4:15 PM (5 Replies)

Rating (1)

Thanks 3

6 Entries

8/29/2011 4:15 PM	Rate (0)
Kovsh Posts: 8 Rating: (0)	Hi, I have STEP 7 Professional (TIA Portal) V11 software. Iintegratedthe libraryCE-X21_S7-1200_GPRS_library_V15 to s7-1200 program, in OB1 call FB144 andset the parameters.I already did this steps in STEP 7 (TIA Portal) V10.5 software and it is working. But STEP 7 (TIA Portal) V11 can't compile FB144 and inform about the following errors: PLC_1,,5,0,4:36:27 PM Program blocks,,5,0,4:36:27 PM com (FB144),,5,0,4:36:27 PM Network 51,The element is not supported in this language version.,1,0,4:36:41 PM Network 51,The element is not supported in this language version.,1,0,4:36:41 PM Network 53,The element is not supported in this language version.,1,0,4:36:41 PM Network 55,The element is not supported in this language version.,1,0,4:36:41 PM Network 57,The element is not supported in this language version.,1,0,4:36:41 PM ,Compiling completed (errors: 5; warnings: 0),1,0,4:36:46 PM How to fix this problem? Attachment TIA_Portal_FB144_errors.JPG (644 Downloads)
Kovsh Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

8/30/2011 12:22 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/19/2024 Posts: 4353 Rating: (1454)	Hi, do you have tried to "compile -> rebuild all"?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users AymericProftia AutoGen_4572903

8/31/2011 9:22 AM	Rate (0)
Kovsh Posts: 8 Rating: (0)	Hi, I re-install STEP 7 (TIA Portal) Professional V11 software, Install STEP 7 (TIA Portal) Professional V11 SP1, Install STEP 7 (TIA Portal) Professional V11 SP1 Update 1 and now all is OK. Thank you.
Kovsh Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

12/8/2011 9:57 PM	Rate (0)
telfex Posts: 8 Rating: (1)	I have the same problem usign TIA V11 SP1 Update 2. Version of library is 1.5 for TIA V11 S_MOVE block is not supported and causing compile error. Is there any other solution instead reinstalling software? Regards, Nejc
telfex Posts: 8 Rating: (1)
Suggestion To thank Quote Answer

12/20/2011 1:15 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 11/27/2024 Posts: 1921 Rating: (136)	Hello, S_MOVE is supported in TIA Portal V11 for the S7-1200, but not for the S7-300/400. With best regards Cicero

Suggestion To thank Quote Answer

12/20/2011 4:47 PM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Most of the configuration examples are written in V10.5. They can cause some problems in V11, because of different behaivor of functions inside the examples. If you have not the possibility to edit the FBs by your own, you can inform the developer via the link "suggestion for the entry" at the end of each example. I think more and more they will provide running examples for V11.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AymericProftia

|

Share this page:

Share this page on...

Follow us on