Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FB's in Step5

Created by: malbec at: 12/1/2014 9:20 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

12/1/2014 9:20 AM	Rate (0)
malbec Posts: 54 Rating: (0)	Hello I have a Step5 project I need to convert and in this project there are some FB's that I don't understand (e.g FB201, FB202 ...). Where can I fing a list of all the system FB's of the Step5?
malbec Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

12/1/2014 9:49 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, Can you tell us what system you have, because different system have different standard functions. These functions are in the system manual. FB 201, 202 can be anything(but could be PID function), do they have a name? Regards, Marcjan
	Last edited by: Marcjan at: 12/1/2014 9:50 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

12/1/2014 10:07 AM	Rate (0)
malbec Posts: 54 Rating: (0)	How can I know that? I have only the project without the symbol list.
malbec Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

12/1/2014 10:24 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, Uploaded project? Please attach(or include as code)a printout off the blockcall. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

12/1/2014 10:39 AM	Rate (0)
malbec Posts: 54 Rating: (0)	See attached Attachment 12-630ST.zip (606 Downloads)
malbec Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

12/1/2014 11:26 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, The blocks you mentioned are no standard functions, you can open them. By the way the program converts with only 1 error. This is the FB200(now fc 200) [code] FUNCTION FC 200 : VOID NAME: STO0_OK // STO 0=OK VAR_INPUT FEHL :bool; // FEHL END_VAR VAR_OUTPUT STO1 :bool; // STO1 STO2 :bool; // STO2 END_VAR BEGIN NETWORK AN #FEHL; AN #STO1; BEC; AN #FEHL; A #STO2; R #STO1; A #FEHL; S #STO1; AN #STO1; R #STO2; A #STO1; A M 10.3; S #STO2;[/code] What is the problem you have with this function? Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/8/2015 3:52 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by jherson Andrade is split to a separate thread with the subject S5 to S7 migration, FB201 block (PID) to FB41. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on