Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FB TIMESTMP (FB62) - want to transfer it to the scada

Created by: karn at: 5/23/2008 12:40 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/23/2008 12:40 PM	Rate (0)
karn Posts: 25 Rating: (0)	Dear All, I am able to see the timestamps in plc.But if the same i want to transfer it to the scada i am facing a problem. Please give me procedure to transfer. How it differs if i use SFB35 (ALARM_8P) BLOCK? Please tell me how you have transferred all the these timestamps to wincc Please help me out, i am writing this mail fromsite. with regard's Karthik
karn Posts: 25 Rating: (0)	Last edited by: CS Moderator at: 5/24/2008 12:39 AM new subject after splitting
Suggestion To thank Quote Answer

5/23/2008 1:06 PM	Rate (0)
Aret Posts: 2348 Rating: (264)	We used freeware OPC-server, that "Concataneited" signal value and timestamp, so WinCC could see righttimestamps.MaybeAlarm_8Pwouldbebetter=don'tknow.
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

5/23/2008 1:15 PM	Rate (0)
karn Posts: 25 Rating: (0)	Dear Aret, Thanks for you reply, Can you tell me from opc server(all the tags)how you configured this in wincc. Can you give some picture about how you configured from PLC-->OPC-->wincc I will also try out the same. thanks karthik
karn Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

5/27/2008 12:05 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, see FAQ http://support.automation.siemens.com/WW/view/en/24757102
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

7/4/2008 11:01 AM	Rate (0)
karn Posts: 25 Rating: (0)	Dear Aret, Thanks for your reply, In one of my project i have the same requirement.Can you please tell me how to transfer the timestamps to the WINCC. Please tell me the procedure. I request you to kindly get me some project backup. with regard's Karthik
karn Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on