Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FC105 Strange Behaviour

Created by: Adham at: 3/20/2011 3:56 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/20/2011 3:56 PM	Rate (0)
Adham Posts: 28 Rating: (0)	Dear All, I'm using the scaling block FC105 in my program since a couple of yers now, but now all of a sudden when i add a new one the scaling is not functioning correctly. does anybody know what could be the cause of this? Adham
Adham Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

3/20/2011 4:14 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 6/5/2023 Posts: 6804 Rating: (1345)	Adham I'm using the scaling block FC105 in my program since a couple of yers now, but now all of a sudden when i add a new one the scaling is not functioning correctly. does anybody know what could be the cause of this? Dear Adham 1- Please check if you parameterized the FC105 properly 2-The input or output of this function is not used or written by some codes in you program.Change the addresses used and check the result. BR
	Demo Channel on Youtube
Suggestion To thank Quote Answer

3/20/2011 6:03 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, And if hdhosseini's advices aren't helpful please give us more details in order to clarify the problem. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

3/22/2011 12:08 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Adham Please check your user program as it is a common mistake not to call FC in a OB. Or check the parameters given in FC105 as it works fine. Have fun..
	Jazz
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on