Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

fc105

Created by: saeedplc at: 10/8/2011 6:06 PM (6 Replies)

Rating (1)

Thanks 2

7 Entries

10/8/2011 6:06 PM	Rate (0)
saeedplc Posts: 288 Rating: (4)	hello. i would like to use fc105 for analog scaling. for this purpose i insert the fc from following directory: standard libraries>standard library>ti-s7 converting block>fc105 my problem is that: there isn't low limit,high limit and etc. comment and the block is different from standard fc105 block. is the directory wrong? simatic manager software is v5.3+sp1 please check the attachment. best regards. Attachment fc105.JPG (327 Downloads)
saeedplc Posts: 288 Rating: (4)
Suggestion To thank Quote Answer

10/8/2011 7:20 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 6/1/2023 Posts: 6803 Rating: (1345)	saeedplc hello. i would like to use fc105 for analog scaling. for this purpose i insert the fc from following directory: standard libraries>standard library>ti-s7 converting block>fc105 my problem is that: there isn't low limit,high limit and etc. comment and the block is different from standard fc105 block. is the directory wrong? simatic manager software is v5.3+sp1 please check the attachment. best regards. Dear saeedplc Please check the attachment for more information. Best regards Attachment TEST.pdf (366 Downloads)
	Demo Channel on Youtube
Suggestion To thank Quote Answer

10/8/2011 7:49 PM	Rate (0)
saeedplc Posts: 288 Rating: (4)	dear hdhosseini. thanks for your reply but i mean that why does instead of writing "hi-limit" it has been written "ogr" i want to insert the fc like the following attachment. does the software has problem? best regards. Attachment fc105-1.JPG (237 Downloads)
saeedplc Posts: 288 Rating: (4)
Suggestion To thank Quote Answer

10/8/2011 8:17 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Can you copy the FC105 from other projects you have created. Or you have taken it from some other library. I have it on the same library --> standard library --> TiS7 --> FC105, Can you post your screen shot of your library. Oh check one more thing do you have exisiting block FC105 in your project. Have fun...
	Jazz
Suggestion To thank Quote Answer

10/8/2011 11:40 PM	Rate (1)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 6/1/2023 Posts: 6803 Rating: (1345)	saeedplc dear hdhosseini. thanks for your reply but i mean that why does instead of writing "hi-limit" it has been written "ogr" i want to insert the fc like the following attachment. does the software has problem? best regards. Dear saeedplc You have selected FC105 in "stdlibs"-->fblib1. Check the right library(TI-S7 converting blocks) for FC105,see the attachment! Best regards Attachment fc105.zip (414 Downloads)
	Demo Channel on Youtube
Suggestion To thank Quote Answer

10/9/2011 6:33 PM	Rate (0)
saeedplc Posts: 288 Rating: (4)	thanks you very much dear hdhosseini. you was right the library which i had selected was wrong and after selecting the right library the problem solved. best regards.
saeedplc Posts: 288 Rating: (4)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

4/17/2012 9:17 PM	Rate (0)
Humble Posts: 8 Rating: (0)	Hi Saeedplc, I know that you do not need this info. However, I just saw you questioned about the existence of 'ogr' instead of 'Hi-Limit'. The 'ogr' is the same terminology in German as it stands for 'Obergrenze'. Similarly, 'ugr' is the low limit and stands for 'Untergrenze'.
Humble Posts: 8 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

|

Share this page:

Share this page on...

Follow us on