Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

feedback monitoring and user ack

Created by: lakebodom at: 7/14/2016 12:33 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/14/2016 12:33 PM	Rate (0)
lakebodom Experienced Member Joined: 6/13/2012 Last visit: 10/31/2024 Posts: 64 Rating: (0)	I know that for feedback monitoring of contactors and for user acknowledgment in failsafe applications is possible to use normal digital inputs, right? Why in "Industrial Software - SIMATIC Safety - Configuring and Programming" and in the "getting started" is reported a failsafe DI module for feedback and acknowledgment ?
	Last edited by: lakebodom at: 7/14/2016 12:34:30 PM
Suggestion To thank Quote Answer

7/18/2016 9:29 PM	Rate (0)
Marko Bursic Platinum Member Joined: 9/8/2009 Last visit: 7/17/2023 Posts: 1410 Rating: (153)	Post a link of the manual. As you have correctly understood, there is no need to use safety input for reset (ack) and contactor feedback.

Suggestion To thank Quote Answer

7/27/2016 7:38 AM	Rate (0)
SMJE Silver Member Joined: 1/30/2006 Last visit: 9/16/2024 Posts: 310 Rating: (59)	You do not need Safety Inputs for Feedbank signals. See this axample for further information https://support.industry.siemens.com/cs/us/en/view/21331098 BR. Sven
	Last edited by: SMJE at: 7/27/2016 7:39:28 AM BR. Sven
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on