Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Files needed to open S5 archive

Created by: Gustavo Dias at: 8/1/2017 1:33 PM (7 Replies)

Rating (0)

Thanks 1

8 Entries

8/1/2017 1:33 PM	Rate (0)
Gustavo Dias Experienced Member Joined: 10/7/2016 Last visit: 5/22/2024 Posts: 66 Rating: (1)	Hi all, In my s5 backup I have only .S5D file, to open and read/change the project I need .INI and .SEQ files??
	Last edited by: Gustavo Dias at: 8/1/2017 3:34:22 PM
Suggestion To thank Quote Answer

8/1/2017 4:44 PM	Rate (0)
Aviator_747 Posts: 92 Rating: (5)	Hello Well, First of all, you need to build a project and save that with " F6", after that it's possible to open and explore in your backup file. ******ST.S5D. Best Regards
Aviator_747 Posts: 92 Rating: (5)	Last edited by: Sky Diver840 at: 8/1/2017 4:45:29 PM
Suggestion To thank Quote Answer

8/1/2017 5:25 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/20/2024 Posts: 34442 Rating: (4294)	Probably the file is a pure backup from the CPU. In the ****** ST.S5D only the naked program code is stored. Comments and assignment lists (symbolic names of the operands) are not included. For this reason, you probably do not have * .INI files or * .SEQ files.

Suggestion To thank Quote Answer

8/1/2017 6:32 PM	Rate (0)
Gustavo Dias Experienced Member Joined: 10/7/2016 Last visit: 5/22/2024 Posts: 66 Rating: (1)	So I need this files to can read coments... In original file (the that go online with hardware) can I find .INI and .SEQ?

Suggestion To thank Quote Answer

8/1/2017 6:35 PM	Rate (0)
Gustavo Dias Experienced Member Joined: 10/7/2016 Last visit: 5/22/2024 Posts: 66 Rating: (1)	Sky Diver840 Hello Well, First of all, you need to build a project and save that with " F6", after that it's possible to open and explore in your backup file. ******ST.S5D. Best Regards Including comments?

Suggestion To thank Quote Answer

8/1/2017 6:37 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/20/2024 Posts: 34442 Rating: (4294)	No. In in the CPU of the S5 is only the pure program code, no comments, no symbolism.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Aviator_747

8/2/2017 7:06 PM	Rate (0)
Aviator_747 Posts: 92 Rating: (5)	It's necessary to have at least *.INI files. If it is possible for you, Upload your ST.S5D files here( as an archive ). I'll test on my system tomorrow.
Aviator_747 Posts: 92 Rating: (5)
Suggestion To thank Quote Answer

8/11/2017 7:21 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (173)	New question published by Alberto1976@ is split to a separate thread with the subject Have to load a S5D file - Don't have the INI and SEQ files.. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on