Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Firmware 4.3 to 4.4 Error

Created by: Agilesh at: 10/7/2021 6:54 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

10/7/2021 6:54 AM	Rate (0)
Agilesh Member Joined: 9/5/2020 Last visit: 1/20/2023 Posts: 8 Rating: (0)	Hello, I have S7 - 1214c DC/DC/DC 6ES7 214- 1AG40-0XB0 PLC, I tried to update the firmware from v4.3 to v4.4 in TIA Portal 15.1 but I am getting error - Firmware not suitable. What should I do to update the firmware? Thank you

Suggestion To thank

10/7/2021 6:56 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 1/27/2023 Posts: 21197 Rating: (2797)	stop double posting https://support.industry.siemens.com/tf/ww/en/posts/s7-1200-firmware-update-error/269622/?page=0&pageSize=10

Suggestion To thank
This contribution was helpful to 1 thankful Users Jen_Moderator

10/7/2021 7:32 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 1/27/2023 Posts: 6408 Rating: (125)	Closed cause question posted twice. The second thread with the subject S7 1200 - Firmware update Error is published within the conference SIMATIC S7-1200. Best regards, Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on