Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Firmware Use of S7-1200 V2.0.2 in Simatic Basic V10.5

Created by: Ratan at: 8/25/2011 6:50 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/25/2011 6:50 AM	Rate (0)
Ratan Experienced Member Joined: 12/7/2010 Last visit: 9/10/2023 Posts: 89 Rating: (0)	Dear all I have software of STEP 7 Basic V10.5 and i want to program CPU 1214DC/DC/DC of Version 2.0.2. It can be possible or i have to add some files for programming.
	Last edited by: Ratan at: 8/25/2011 5:23 PM
Suggestion To thank Quote Answer

8/25/2011 10:26 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/23/2023 Posts: 1500 Rating: (221)	FW 2.0.2 of CPU 1214 can be used along with STEP 7 Basic / Professional v11 only. Else nothing is guaranteed - you can check the same here SIMATIC S7-1200 CPU with Firmware 2.0
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on