Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FLASHING OF MAINT INDICATOR LED

Created by: sare12 at: 6/16/2017 8:01 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/16/2017 8:01 AM	Rate (0)
sare12 Posts: 1 Rating: (0)	Hello Dear Experts, I have a PLC S71200 CPU1215 C V4.1 6ES7215-1AG40-0XB0, when power on this PLC the run/stop and MANT led orange flashing. I try to RUN PLC though TIA V13 but failure.I took online this PLC and did reset factory setting , but still MANT led Orange flashing. I insert SIMATIC MEMORY CARD 2MB to plot on this PLC But still MANT led orange flashing.I give power cycle but it fail & try to reset from S7. I withdraw memory card, then RUN again but it also failure.
sare12 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/16/2017 8:07 AM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1027)	hi sare12, have a look online to get a further diagnostic. regards,
	FCK WAR! Be nice!
Suggestion To thank Quote Answer

6/16/2017 9:30 AM	Rate (0)
automationguy123 Bronze Member Joined: 5/15/2010 Last visit: 12/6/2022 Posts: 170 Rating: (3)	Also check version of firmware....

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on