Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Floppy disk problem in 840D

Created by: emil2 at: 6/25/2012 12:54 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

6/25/2012 12:54 PM	Rate (0)
emil2 Posts: 11 Rating: (0)	Hello Experts, Our system is PCU50 from 2003. We send afloppy disk for repair (not responding at all), butthe floppy was ok and come back. We testedthe floppyin another machine and it was working but not in the original machine. Can someone tell me what the problem might be. I used it one year ago without problem. No onehave make any changes of the system. Best Regards emil2
emil2 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

6/25/2012 3:12 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... Boot your PCU50 in windows mode.Go to my computer>properties>Device manager in this you will find the floppy driver try uninstalling and scan for harware changes.... it will recognize your floppy driver now you check it... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/25/2012 5:33 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	Hi Is the Floppy in the BIOS eneabled. Please test it. Regards Karl
	Karl
Suggestion To thank Quote Answer

6/26/2012 10:30 AM	Rate (0)
emil2 Posts: 11 Rating: (0)	Hello again, Thanks for your fast replay. We have NT4 in our machines and there are no uninstall and scan feature. But i disable and enable the floppy in the device feature under control panel. Drive A: was disappeared in filebrowser and then come back whenI enabled the device. This action did not activated the drive. I looked in the bios and the drive was enabled. Can something else be the problem? Best Regards /emil2
emil2 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

6/26/2012 3:12 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... Could you check floppy drivers slotin your pcu 50 any pins are bent / damaged that may causing the floppy driver not to work. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)	Last edited by: Ekalavya at: 6/26/2012 3:13 PM
Suggestion To thank Quote Answer

6/26/2012 7:19 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	Hi I think, the external power 24VDC for Floppy you have messuring. Regards Karl
	Karl
Suggestion To thank Quote Answer

6/28/2012 5:19 PM	Rate (0)
emil2 Posts: 11 Rating: (0)	Hello again, Thanks for the replays, I have now check the slot and no pins are bend or broken. We have 24V in the cable. I have Pcu50 unitsin stock so i will replace it and check. Thanks again! /emil2
emil2 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on