Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Floppy disk

Created by: danial at: 2/7/2008 6:40 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/7/2008 6:40 PM	Rate (0)
danial Posts: 31 Rating: (0)	Dear sir, I got a floppy disk 3.5" (not USB), I would like to install it into a SINUMERIK 840D-PL ,PCU20 , OP010. I saw in the document that I will need a software (deskket drive software)-I have this softeware- but I don't know how to use. if there is any problem whith that I said before please kindly tell me how to install it. Your co-operation is highly appreciated. danial
danial Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

2/7/2008 11:01 PM	Rate (0)
SteveJ Posts: 328 Rating: (29)	Hi Danial Im am unclear,What type of FDD do you have? If it is an IDE type, i would expect it should connect directly to the IDE port on the PCU20 without need for drivers? Regards SteveJ
SteveJ Posts: 328 Rating: (29)
Suggestion To thank Quote Answer

2/7/2008 11:39 PM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (56)	Hi, Are you using a Siemens disk drive ? Have you tried plugging it in The interface on the PCU's does not provide a power supply so you need the Siemens device and a 24V supply
Pee Ell Sea Posts: 672 Rating: (56)
Suggestion To thank Quote Answer

2/8/2008 1:04 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 3/19/2023 Posts: 583 Rating: (64)	Hi. For use FDD for PCU20 it is necessary an option: 6FC5253-0AE01-0AA0 Successes.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on