Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM 350-2 Start Up Problem - SOLVED

Created by: zeroptr at: 7/1/2009 3:04 PM (14 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

7/3/2009 8:19 AM	Rate (0)
zeroptr Regular Member Joined: 5/27/2009 Last visit: 11/28/2019 Posts: 31 Rating: (0)	any suggestions?

Suggestion To thank Quote Answer

7/3/2009 4:01 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/1/2023 Posts: 8596 Rating: (1139)	zeroptr I'm trying this with the simulator.. Hi, What do you mean , you do not use the hardware. At the moment, I do not have FM350-2, but I think in DB40.DBD52 there is 250 and so when you use Jobnr. 10 it should be the actual value of counter 0 (when you use hardware) Best regards, Wizard

Suggestion To thank Quote Answer

11/1/2012 4:15 AM	Rate (0)
leauto Posts: 5 Rating: (0)	solve problems that are not? i also have such problems
leauto Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

11/1/2012 8:44 AM	Rate (0)
leauto Posts: 5 Rating: (0)	zeroptr To solve the problem I prepare a sample project that we can under stand what I'm doing wrong... AT OB100 I set a bit M 30.3 if M30.3 is TRUE then At OB1 NW5 I try to change load value... after that network active count value must changeto 250 but it's not.. I'm trying this with the simulator.. I hope the sample helps to solve the issue... Thanks again who shares their valuable informations... solve the problems ok? i also have such the problem,can you help me not?
leauto Posts: 5 Rating: (0)	Last edited by: dinhle at: 11/1/2012 8:46 AM
Suggestion To thank Quote Answer

6/6/2016 10:36 AM	Rate (0)
The Helping Hand Moderator Joined: 8/21/2014 Last visit: 12/4/2023 Posts: 737 Rating: (12)	New question published by esmaiil is split to a separate thread with the subject FM 350-2 - Channels don't work correctly. Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards The HelpingHand
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on