Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM 350-2

Created by: eswaran at: 8/6/2009 7:46 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

8/6/2009 7:46 AM	Rate (0)
eswaran Posts: 7 Rating: (0)	Hi, I have created one program using Counter module FM 350-2,is it possible for me to check that program using simulation software itslef. regards Veera
eswaran Posts: 7 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users prabakar

8/6/2009 8:47 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	eswaran Hi, I have created one program using Counter module FM 350-2,is it possible for me to check that program using simulation software itslef. regards Veera As far as i know, it is not possible to test the FM in simulation. You can try to simulate the Inputs (I, PIW) with PLCSIM, but it will not work, I am afraid.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

8/10/2009 9:06 AM	Rate (0)
lc00lc00 Posts: 1 Rating: (0)	cannot use simulation function for FM350. but I suggest to use 24V signal to test, that's very easy.
lc00lc00 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on