Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM 350 : actual compare values

Created by: Simotion at: 4/23/2010 1:10 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/23/2010 1:10 PM	Rate (0)
Simotion Posts: 223 Rating: (1)	I use a FM350 : 350-1AH03-0AB0 in counting mode. I use the 'FC_CNT_CTRL' from the Siemens library. I downloaded the configuration package for FM350 one week ago as the latest download from the Siemens site. Before it was never installed on my pc. So I gues I will have the latest release of the functions. I can read in the countervalue of the encoder, I can set the load value and I can set the compare value. I use periodic counting in forward direction. Everything works fine. Only I do not see the actual used compare value : ACT_COMP1 adres dbd 46. Although I see in my tests that the set compare value of CMP_V1 is used. I wanted to use the ACT_COMP1 as an acknowledge that my new compare value is transferred ok to the card. Now I have no acknowledge of succes? Is this a bug in the system, or could I have something wrong in my configuration. Thanks
Simotion Posts: 223 Rating: (1)
Suggestion To thank Quote Answer

5/17/2013 12:39 PM	Rate (0)
lukaa Posts: 3 Rating: (0)	Hello, have you found out what was wrong? Now I havea similar situation. It seems that maybe FM350-1 card doesn't support such information.. Previously I worked with FM450-1 and there was no problem with this.. Regards
lukaa Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

5/17/2013 2:25 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 9/4/2024 Posts: 4620 Rating: (707)	Hi Simotion, You can not see this value because the color are gray?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on