Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM 353 POSITION MODULE

Created by: ahsan1820 at: 1/18/2012 6:40 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/18/2012 6:40 PM	Rate (0)
ahsan1820 Posts: 119 Rating: (1)	I am using FM353 with cpu315 2DP ,i have tested my FM via the test and startup opion in hardware settings.but when i am using the variable table 1 of the example program on the following link of configuration package . http://support.automation.siemens.com/WW/view/en/12559629 there is no pulses at the output and also means module start check back signals are not displaying any moduls running status.
ahsan1820 Posts: 119 Rating: (1)
Suggestion To thank

1/18/2012 7:27 PM	Rate (0)
ahsan1820 Posts: 119 Rating: (1)	simply gude me how to use the give example program for jog mode.
ahsan1820 Posts: 119 Rating: (1)
Suggestion To thank

1/23/2012 8:55 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the following thread how to read the output pulse counter of FM 353 Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on