Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM 353 & Refference Point Approach

Created by: Ivan Pagáč at: 3/21/2010 5:26 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/21/2010 5:26 PM	Rate (0)
Ivan Pagáč Posts: 2 Rating: (0)	Hi there, I working with FM 353 Positioning Module. My problem is, that after each working , I need to load new distance into module . Iam looking into manual but these values are in the MachineData Block (MD) and i dont know how to load the new values into module. Can you help me, please? Thank you P.S. : iam really new in simatic :)
Ivan Pagáč Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/27/2010 6:49 PM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi Go into Simatic manager, click on the Simatic in the left pane and then double click on the hardware in the right pane and a Hardware configuration windows is opening. Double click on the FM353 module and go on the Parametrize panel and click Parametrize. Here you will find the Machine Data. Good luck Nit
	Last edited by: Nit at: 3/27/2010 6:57 PM
Suggestion To thank Quote Answer

3/28/2010 5:58 PM	Rate (0)
Ivan Pagáč Posts: 2 Rating: (0)	Hi there, thank you for your interest, but Iam solving a problem HOW to modify these values programmaticaly from the program.
Ivan Pagáč Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on